Panasonic ty-tp50p30k User Manual

5

     

•  

 Place the touch panel making its front surface face down on a clean cloth or blanket to prevent the front 
surface of the touch panel from getting scratched or dirty during work.

 Mounting in horizontal posture

Attach the mounting brackets A (for top and bottom sides) to the touch panel with the mounting screws A (2 each).
See the ¿ gure below for the screw holes of attachment positions.

Attachment positions

(8 holes without screws in them)

 Mounting in vertical posture

Check in the ¿ gure below the positions where the brackets are attached, and remove the screws (8 in total from top and bottom sides).
Attach the mounting brackets A (for top and bottom sides) with the mounting screws A (2 each) to the screw 
holes from which the screws were removed.

     

•  

 For screw holes of other models than 42V, see “Drawing of Screw Holes” (page 14).

     

•  

 Keep the screws which were removed.

The procedure for vertical posture is the same.

1

2

3 4

5

6

Mounting screw A

Mounting 
bracket A 
(for top side)

Top side (42V)

Bottom side (42V)

1

2

3 4

5

Mounting screw A

Mounting 
bracket A 
(for bottom 
side)