Panasonic vb43060 User Manual

Chapter 6. SLT Features

Section 700 - Operation  

6-14

DBS Manual - Revised April 2000

DBS-2.3/9.2-700

• If more than one call is arriving at the Paging Group, the Group Call 

Pickup feature will answer the call to the lowest port number first.

• If the called extension belongs to more than one Paging Group, the Group 

Call Pickup Feature will answer the call to the lowest-numbered Paging 
Group first.

• You can answer incoming calls, Intercom Tone Calling, or Intercom Voice 

Calling using the Group Call Pickup feature. 

• Group Call Pickup cannot be used to pick up a ringing phone in Paging 

Group 00. For example, if an extension is a member of Paging Groups 00 
and 06, the extension can use Group Call Pickup to answer ringing calls in 
Group 06, but not in Group 00.

(All Versions)

The DBS provides two call transfer methods: blind transfer and screened 
transfer.

With CPC-A and CPC-B Versions prior to 2.0, SLTs can only transfer trunk 
calls. Beginning with CPC-B Version 2.0, SLTs can transfer trunk and 
intercom calls.

Blind transfer allows the transfer of a call directly to an extension, without 
waiting for the called extension to answer.

1.  Flash the switchhook to place the call on hold.

2.  Dial the number of the extension to which the call is to be transferred.

3.  Replace the handset before the other party answers.

• You can also replace the handset after the third party answers.