Panasonic WJ-HD200 User Manual

50

6. Repeat from step 1 to search for another time and date

or press the [TIME&DATE SEARCH] button to cancel
the function. Pressing the [STOP] button will also end
the searching.
Note:  Searching may take the recorder 18 seconds at

worst

■ Multiscreen Playback

You can view a multiple playback image displayed in 4-split
or 9-split pattern on the monitor at a time.

• Normal Playback

Press the [PLAY] button to start normal playback. The
image data recorded on the disk are sequentially
played back, and the monitor displays images in the
single display mode or multiscreen display mode.

• Multiscreen Playback

Press the [MULTI SCREEN SELECT] button an appro-
priate number of times. The monitor display changes as
follows. The LED’s in the [MULTI SCREEN SELECT] but-
ton and respective input buttons will light up. 

Single Image 

→ Quad A (4A/comprising inputs 1, 2, 3,

and 4) 

→ Quad B (4B/inputs 5, 6, 7, and 8) → Nine-spit

(inputs 1 - 8) 

→ Quad A → Quad B → Nine-split

• Specific Input Playback

Press the respective input button. The images of the
selected input are played back continuously and dis-
played on the monitor.

• Stop Playback

Press the [STOP] button to stop playback.
Note: When the playback proceeds to where recording

is executed on the disk, the recorder will pause
playback and freeze the displayed image on the
monitor.

4. Press the [PLAY] button to play back the searched

record.

5. Press the [STOP] button to stop playback.

Note:  "Alarm Search Playback" and "Alarm Log Recall"

are similar, but different in operations. Refer to 
■ Alarm Log Recall & Search on page 46.

■ Time & Date Search Playback

A picture record of a specified time and date is played
back.

1. Press the [TIME&DATE SEARCH] button. The LED in

the button lights up. The monitor displays the time &
date search window.

2. Press the [D] or [C] button to move the cursor to the

next position.

3. Rotate the JogDial clockwise to increase the parameter

or counter-clockwise to decrease it.

4. Repeat steps 2 and 3 above until the desired parame-

ters are selected. 

5. Press the [PLAY] button to start playback. The monitor

displays the single spot image when an input is select-
ed or the nine-split image when all input is specified.
The recorder stops searching when the playback
reaches the end of the record.

HDD

FULL

ERROR

MULTI SCREEN

SELECT

ZOOM

ALARM

SERCH

STOP

PLAY MODE SELECT

SETUP

/ESC

PLAY

REC

PLAY

TIME&DATE

SEARCH

REC STOP

ALARM

RECALL

REC

PUSH—    PAUSE

SET