Panasonic WJ-SX150A User Manual

135

Matrix switcher can control Digital Disk Recorder WJ-
HD200 Series. The following is the procedure of WJ-HD200
Series SETUP MENU.

• The following operating procedures are for the terminal

mode. If you are using a PS·Data system controller,
refer to p. 143.

• When a Multiplexer board is installed in the unit, you

can neither connect nor control a WJ-HD200 Series
recorder. You need to remove the board from the unit.

■

The operations are the same as WJ-HD500 Series. (Refer to
p. 130.)

■

The following are the operating procedures of WJ-HD200
Series via system controller.

Refer to the operating instructions of Digital Disk

Recorder WJ-HD200 Series for details.

●

The operations are the same as WJ-HD500 Series. (Refer to
p. 131.)

●

The operations are the same as WJ-HD500 Series. (Refer to
p. 131.)

4C-, 4D-, 7-, 10-, 13- and 16-segment multiscreen

display are unavailable.

●

The operations are the same as WJ-HD500 Series. (Refer to
p. 131.)

You cannot skip to the previous/next record.

●

The operations are the same as WJ-HD500 Series. (Refer to
p. 132.)

Refer to WJ-HD200 Series Operating Instructions for

details and other recording modes. 

●

The operations are the same as WJ-HD500 Series. (Refer to
p. 132.)

●

You can search playback images using the ALARM
RECALL table or the SEARCH table.

Every time you press the INDEX button, the display will
change as follows.
Live image 

→

Date-and-time entry form 

→

ALARM RECALL

table 

→

Live image

The recorded images can be searched for through the date
and time.

1. Enter the recorder mode. (Refer to p. 131 Recorder

Mode.)

2. Press the INDEX button. The date-and-time entry form

will appear on the center of the monitor.

The factory default setting is the current date and

time.

F2