Panasonic wj-hd500 User Manual

■

Phenomenon

Cause

What to do

No power is supplied.

Power cord connection is insufficient.

Securely plug the cord into AC outlet and  AC
inlet..

HDD access lamps blink.

The Inner connector is loosening.

Securely  plug the inner connector.

Thermal error. OPERATE indicator
lights in orange.

Extension HDDs are not recog-
nized.

Ventilation openings or fan is blocked.

Cooling fan failed.

Remove obstacles.

Consult your dealer for the replacement.

SCSI ID setting

Set ID number properly.

Termination

Set termination properly.

SCSI cable

Use the supplied cable & connect it securely.

Power-on sequence

Turn on peripherals first, then HD500!

HDD unit position

Install HDD unit to the right position.

Ambient temperature is too low.

Use the unit within +5 °C to +45 °C.

■

Required Power:

220 V - 240 V 50 Hz

Power Consumption:

55 W (inclusive of 4 HDD units if installed)

Interface: 

SCSI-2 (FAST SCSI)  Half-pitch 50/pin D-Sub

Operating Temperature:

+5 °C to +45 °C (41 °F to 113 °F)

Dimensions:

420 mm (W) x 88 mm (H) x 350 mm (D), rubber feet exclusive
16-9/16” x 3-7/16” x 13-13/16”

Weight:

WJ-HDE500: 7.3 k

g (16 lbs)

WJ-HDE505: 8.0 k

g (17.6 lbs)

Weight and dimensions indicated are approximate.
Specifications are subject to change without notice.

■

Power Cord  ...................................................................... 2 pcs.
SCSI Cable ....................................................................... 1 pc.
Rack Mounting Bracket..................................................... 2 pcs.
Bracket Fixing Screw ........................................................ 4 pcs.

NM1000-0

V8QA5622AN

Printed in Japan

N 19

2000

© Matsushita Communication Industrial Co., Ltd.  All rights reserved.

Central P.O. Box 288, Osaka 530-91, Japan