Panasonic WV-BM500 User Manual

-7-

1. Keep the camera Power switched OFF during

installation.

2. Connect the Power Cord (16) to a 50 Hz grounded

electrical outlet 220-240V AC .

1. Use the RG-59/U (3C-2V), RG-6/U (5C-2V). RG-

11/U (7C-2V) or RG-15/U (10C-2V) coaxial cable.

2. Up to 10 monitors can be hooked up in this config-

uration before signal loss occurs. Total cable
length should not exceed 500 feet (150m).

3. Wiring Precautions

• Do not bend coaxial cable into a curve whose

radius is smaller than 10 times of its diameter.

• Never crush or pinch the cable

All these will change the impedance of the cable
and cause poor picture quality

Cable

RG-59/U

RG-6U

RG-11/U

RG-15/U

(3C-2V)

(5C-2V)

(7C-2V)

(10C-2V)

Recommended

(m)

500

750

1000

1250

maximum
cable length

(ft)

1650

2475

3300

4125

Recommended maximum cable length

When a non-composite video signal is connected to

the monitor, it will be necessary to connect an external

composite sync signal to the monitor.

1. Connect the Sync Input Connector (14) on the

video monitor to the sync signal source by means

of a 75

Ω

coaxial cable.

2. Set the Sync Selector Switch (13) at EXT position.

1. Non-composite video signal is a signal without

sync.

2. External sync should be composed of mixed H.

Sync and V. sync signals, not H. and V. drive

pulse signals. Composite Sync Level:

4.0 Vp-p (2.0 Vp-p 

−

5.0 Vp-p)