Panasonic wj-hd220 User Manual

28

3. Select the parameter with the JogDial, and press the

JogDial.
The default is REC.

REC: The channel is recorded in alarm recording, timer

recording and manual recording mode.

ALM-ONLY: The channel is recorded only when the

alarm operates.

4. Repeat steps 2 and 3 until all channels are set.

5. Press the [SETUP/ESC] button to return to the PROG1

SETUP, NO. 1 menu.

■ Manual Recording Setup (REC

The WJ-HD220 will record image and audio data either with
or without timer restrictions. Manual recording is available
when OFF is selected for TIMER in WJ-HD220 MAIN MENU;
the timer schedule does not apply. Alarm recording will
also be carried out with parameters specified in this menu.

Refer to 

● Recording Mode Setup PROG1-4 SETUP, NO. 1-

4 for operating procedures and available parameters.

■ Externally Specified Recording

This setting allows changing the recording mode from the
ongoing one to an optional one specified here when turning
on the switch connected externally to the EXT REC terminal.

1. Move the cursor to EXT REC MODE with the [D] or [C]

button.

2. Select the desired mode with the JogDial, and press

the JogDial.
Refer to page 26 for the recording mode parameters.

3. Press the [SETUP/ESC] button to return to WJ-HD220

MAIN MENU.

■ Display Setup (DISPLAY SETUP)

You can program the display of information on the monitor,
such as clock, time and date, and so forth.

● Clock (CLOCK)

1. Press the JogDial (SET) to move the cursor to the

desired position.

2. Rotate the JogDial clockwise to increase the parameter,

or counter-clockwise to decrease. The positions indi-
cate the year, month, day, hour, and minute respective-
ly.
The default is "JAN 01. 04 0:00".

MMM DD. YY HH:MM

3. Press the JogDial (SET) to validate the selection.

4. Press the [D] or [C] button to select the next item, or

press the [SETUP/ESC] button to quit the display setup.

● Time & Date (TIME&DATE DISP.)

1. Select a display type with the JogDial.

The default is TYPE1 24H.

TYPE1 24H: Time and date are displayed in one line in

the 24-hour system.

TYPE1 12H: Time and date are displayed in one line in

the AM-PM system.

TYPE2 24H: Time and date are displayed in two lines in

the 24-hour system.

TYPE2 12H: Time and date are displayed in two lines in

the AM-PM system.

OFF: Does not display time and date.

→ JAN15.04  11:05

O 

O

O