Panasonic wj-hd220 User Manual

46

■ On the Multiscreen Monitor

● Selecting the Multiscreen Monitor

1. Press the [SPOT/MULTI] button to turn the LED in the

button off. The multiscreen monitor is ready to be oper-
ated.

2. Follow the descriptions below for each monitoring mode

on the multiscreen monitor.

● Viewing a Single Live

The multiscreen monitor can display a single live spot
image. 
Operating procedures are the same as for "On the Spot
Monitor" except for selecting the multiscreen monitor.

● Zooming a Single Live 

A single live or playback image on the multiscreen monitor
can be zoomed.

1. Display the desired single live or playback image on

the multiscreen monitor pressing the [ZOOM] button an
appropriate number of times.

2. Hold down the [ZOOM] button for 2 seconds to enlarge

the image.

3. Rotate the JogDial to move the zoomed area to the right

and left, or press the [D] or [C] button to move the
area up or down.

4. Press the JogDial repeatedly to select an appropriate

enlargement ratio.
Pressing the JogDial : Increases the ratio (x2 

→ x4)

5. Hold down the [ZOOM] button for 2 seconds to cancel

the zoom mode.

• The maximum zooming ratio (x4) will be reduced to x2

when SIF is selected for RESOLUTION in the SYSTEM
SETUP menu.

• To quit enlargement

•

While displaying a zoomed live image, pressing the
[PLAY] button will quit enlargement and start normal
playback. 

•

While displaying a zoomed playback image, pressing
the [STOP] button will quit enlargement and display a
live image.

•

For other cases, hold down the [ZOOM] button for 2
seconds.

• The images on the screen may wave vertically when

enlarging live or playback images in the SIF mode. It is
recommended that you select NORMAL for RESOLU-
TION when the display quality is considered much
important.

●

A series of quad and single images is displayed in succes-
sion on the multiscreen monitor. One sequence can be pro-
grammed in the MULTI SEQ SETUP menu with an input
assignment and display duration for each step.

1. Select the multiscreen monitor.

2. Press the [SEQUENCE] button to run the sequence.

The LED in the [SEQUENCE] button lights up.

Note: During the sequence, the LEDs of the [CAMERA

SELECT] buttons light up corresponding to the
selected cameras that send images to the monitor.

3. During the sequence, press the [SEQUENCE] button to

pause. The LED in the [SEQUENCE] button blinks.

4. Press the [SEQUENCE] button to restart the sequence.

The LED turns to a steady light.

SEQUENCE

1

1

3

2

4

2

(4A)

SPOT
MULTI

MULTISCREEN

SELECT

ZOOM

MULTISCREEN

SELECT

ZOOM