Panasonic wj-fs109 User Manual

19

■

1. Remove the four rubber feet by removing the four

screws on the bottom of the video multiplexer.

2. Place the rack mounting brackets on both sides of the

video multiplexer and tighten with the six supplied
screws (M3 x10).

3. Install the video multiplexer with the rack mounting

brackets in the rack by using four screws (not includ-
ed).

• Do not block the ventilation opening or slots on the

cover to prevent the appliance from overheating.
Always keep the temperature in the rack within
50°C (122°F).

• Secure the rear of the appliance to the rack by

using additional mounting brackets (procured
locally) if the rack is subject to vibrations.

Remove 4 rubber feet

Six screws (Supplied)

Fix the rack mounting brackets

EIA 19”
rack

This item lets you notify the Multiplexer of the field interval in
which camera channels are switched on the recorded tape.

1. Move the cursor to the SW INTERVAL parameter.
2. Select 1, 2, or 4 by pressing the 

or 

button.

The initial factory setting is 1.

Select this, if the tape is recorded with field rate 1.

Select this, if the tape is recorded with field rate 2.

Select this, if the tape is recorded with field rate 4.

This item lets you notify the Multiplexer of the highest chan-
nel number recorded on a tape.

1. Move the cursor to the NO. OF CAMS parameter.

2. Select a camera channel between 1-16 (1-9 for WJ-

FS109) by pressing the 

or 

button. The initial factory

setting is 16 (9 for WJ-FS109).

• If PANA is selected, it is not necessary to set SW

INTERVAL and NO. OF CAMS.

• If OTHERS is selected, set the VTR's time mode to 2 H

or 3 H, not to T/L (Time Lapse).

• If OTHERS is selected, tapes recorded with a random

order of camera channels (e.g., recorded in ALM - PRI,
ALM-ONLY or GROUP mode) will not be reproduced
properly.