Panasonic wj-fs109 User Manual
30
■
Camera Switching Pulse Loss
Display
Display
• When loss of the camera switching pulse is detected,
“SW LOSS” will blink on the monitor screen.
• The buzzer does not beep.
• When the camera switching pulse is recovered, “SW
• When the camera switching pulse is recovered, “SW
LOSS” is cleared from the monitor.
OTHER FUNCTIONS
●
Auto Reset
The alarm is automatically reset after the programmed
Alarm Output Time has elapsed.
The ALARM indicator changes from blinking to steady light.
Pressing the
Alarm Output Time has elapsed.
The ALARM indicator changes from blinking to steady light.
Pressing the
ALARM RESET
button will clear the alarm
and make the indicator go off.
●
External Reset
The alarm is reset by a recovery signal received from
the external equipment at pin 8 of the ALARM/REMOTE
connector.
The ALARM indicator changes from blinking to steady light.
the external equipment at pin 8 of the ALARM/REMOTE
connector.
The ALARM indicator changes from blinking to steady light.
■
Alarm Reset
●
Manual Reset
When an alarm is activated, the ALARM Indicator blinks.
The indicator keeps blinking until all alarms are cleared by
pressing the
The indicator keeps blinking until all alarms are cleared by
pressing the
ALARM RESET
button.
The blinking or lit indicator goes off.
ALARM
RESET