Panasonic wj-sx650p User Manual

57

The following is the procedure examples for monitor opera-
tion. Refer to p. 73 Lists of Operations and Functions for
other monitor control procedures not described here. 

■ Monitor Selection

In the following procedure, you can display camera images
or perform setup procedures on a desired monitor. 

1. Enter the desired monitor number by pressing the

numeric buttons. The entered number will appear on
the LCD (or LED display).

<WV-CU950/650>

<WV-CU360C/360CJ>

2. Press the MON (ESC) button. The specified monitor will

be selected, and the system will become ready for
monitor control.

<WV-CU950/650>

<WV-CU360C/360CJ>

3. Control the selected monitor.

Note: Even after you log out of the system or select another

monitor, the camera image or sequence is continuously
displayed on the selected monitor.

■ Monitor Lock

When you log out of the system or select another monitor,
this function can prevent operators with lower priority from
gaining control of the selected monitor and camera(s). 

● WV-CU950/650

1. Press the MON LOCK button. The selected monitor will

be locked.

2. To release the monitor lock, press the MON LOCK but-

ton again.

● WV-CU360C/CJ

1. Press the MON LOCK button while holding down the

SHIFT button.
The selected monitor will be locked.

2. To release the monitor lock, press the MON LOCK but-

ton again while holding down the SHIFT button.

● Note

Monitor lock is released when you select the monitor again,
or an operator with higher priority selects the monitor.