Panasonic wj-sx650p User Manual

85

When using WV-CU360C/CJ, refer to the operating instruc-
tions of recorder.

Alarm ACK, Alarm Individual Reset, and Alarm Monitor
Reset are not available. (Alarm All Reset is available.) When
controlling Alarm History Display from WV-CU360C/CJ, you
cannot skip to 10 pages forward or backward. (Refer to p.
76.)

When you fail in operations, error messages (Not Avail and
Prohibited) will not be displayed on the LCD (or LED dis-
play).

Camera Setup and Preset Position Registration is not
restricted separately by the user level setting. To restrict
them, set Camera Control to "Disabled". User level setting is
performed in "Operator" – "Level Table" of WJ-SX650 Series
Administrator Console.

You cannot control the following functions by pressing the
associated buttons on system controllers. Control them by
entering the system function numbers. (When using WV-
CU950/650, you can specify the system functions marked
with "*" either by pressing the numeric buttons or recalling
the menu functions on the LCD.)

1. Enter the system function number by pressing the

numeric buttons.

2. Press the SYS FUNC*

1

(or FUNCTION*

2

) button while

holding down the SHIFT button.
*

1

WV-CU950/650

*

2

WV-CU360C/CJ

System function

System function number

Monitor lock ON/OFF*

101

System status display ON/OFF

102

Time and date information ON/OFF* 104

Camera information ON/OFF*

105

Event information ON/OFF*

106

Monitor status ON/OFF*

107

All home positions

120

All auxiliaries OFF

121

This chapter includes notifications on operations from sys-
tem controllers in the PS·Data mode, a web browser
accessing the recorder, or a PC.

■ PS·Data Mode Operations

Note: When using a system controller in the PS·Data mode,

check the software version.
The available software versions are as follows.
WV-CU950/650: Ver. 2.00 or later
WV-CU360C/CJ: Ver. 8.10 or later

The following is the restrictions of PS·Data mode opera-
tions. Refer to the operating instructions of system con-
troller for details.

Log into the system by entering the user ID and password
registered in the system controller.  After login, you can
control the unit as a PS·Data operator. PS·Data operator
setting is performed in "Operator" – "Operator" of WJ-SX650
Series Administrator Console.

Auto logout is not available. Log out from the system manu-
ally.

When using WV-CU360C/CJ, you cannot select Camera
200 or greater.

When using WV-CU950/650, camera positions registered in
the system controller are activated. (Up to 999 camera
positions are available.) This function is not available with
WV-CU360C/CJ.

Camera selection steps are memorized in the system con-
troller. (Even when you select another monitor, the memo-
rized steps are not cleared.) This function is not available
with WV-CU360C/CJ.

When using WV-CU360C/CJ, you cannot select Preset
Position 065 or greater.

You cannot select a recorder by entering the recorder num-
ber. To select the recorder, enter the logical camera num-
ber associated with the camera input channel connected to
the recorder.