Panasonic WJ-NT304 User Manual

EIA19-type Rack Mounting Bracket 

(for mounting one WJ-NT314/NT304)

EIA19-type Rack Mounting Bracket 

(for mounting two WJ-NT314/NT304)

• Up to 4 analog cameras can be connected.
• MPEG-4/JPEG digital signal output at VGA image size with up to 30 ips
• MPEG-4 and JPEG dual stream output for simultaneous live 

monitoring and high resolution recording

• Progressive output allows every frame to be clear even when the 

subject is moving.

• Video Analytic (WJ-NT314 only): 8 detection programs, each with 

three intruder detection areas and one object abandonment / 
removal detection area. Up to 8 detected objects per channel can be 
traced. Depth correction allows more accurate detection when the 
scene includes deeper depth.

• Panasonic camera control: Pan / Tilt / Zoom / Focus / Iris / Preset 

position (up to 256), Auto mode, Setup menu. AUX, B/W ON/OFF/ 
Auto, Click centering

• Unit title display: Up to 20 alphanumeric characters on browser
• Camera title display: Up to 20 alphanumeric characters on browser
• SD memory card slot for alarm recording and backup upon network 

failure. Recorded data can be downloaded by using FTP command.

• Alarm sources including 2x AVMD (WJ-NT314 only), 4x Terminal 

inputs, 4x Camera alarms, 4x Video loss alarms and Panasonic 
alarm protocol can trigger actions including SD memory 
recording/FTP image transfer, E-mail notification, Alarm indication, 
Terminal output and Panasonic protocol output.

• Bi-directional audio (1CH)
• Built-in network interface (10Base-T / 100Base-TX)
• Multiscreen: Images from 16 cameras can be displayed in four 

separate Quad screens (JPEG only). 20 characters camera title is 
available for each camera.

• Alarm e-mail notification
• Max bit rate/client for MPEG-4 (64 / 128 / 256 / 512 / 1,024 / 1,536 / 

2,048 / 3,072 / 2,048 / 4,096 / 6,144 kbps) combined with Total bit 
rate control (64 / 128 / 256 / 512 / 1,024 / 2,048 / 4,096 / 8,192 / 
16,384 kbps / Unlimited) allowing flexible network management.

• Supported protocol: TCP/IP, UDP/IP, HTTP, FTP, SMTP, DHCP, 

DNS, DDNS, NTP, RTP and SNMP

• Multi-language capable by localization
• FTP client function enables periodic image data transfer or transfer 

upon alarm.

• Operating Instructions  .................. 1 pc.

• Warranty card

  (NTSC model only) ....................... 1 pc.

• CD-ROM*  ..................................... 1 pc.

The following are for installation.

• AC adapter  ................................... 1 pc.

• Code label  .................................... 1 pc.

• Power cord (NTSC model) ........... 1 pc.

• Power cord (PAL model) ............. 2 pcs.

* The CD-ROM contains the operating
  instructions (PDFs) and the setup tools
  (Panasonic IP setup software, etc.).