Panasonic WJ-NT304 User Manual

14

Remove the 
rubber feet.

z

Remove the rubber feet (4 pcs.) on the bottom of the
unit.

x

Install the rack mounting brackets (Option: Refer to the
following.) on both sides of the unit. Using the mounting
screws (4 pcs.) for the rack mounting brackets, fix them
firmly.

1. When installing one unit:

Model No.: WV-Q204/1S

• Rack mounting bracket (Large) x 1
• Rack mounting bracket (Small) x 1
• Rack mounting screws (M3 x 8: 6 pcs.)

2. When installing two units:

Model No.: WV-Q204/2S

• Rack mounting bracket (Small) x 2
• Joint bracket x 3
• Bracket mounting screws (M3 x 8: 6 pcs.)
• Bracket mounting screws 

(Flat head, M3 x 8: 12 pcs.)

c

Install the unit in the rack.

• Using the rack mounting screws, fix them firmly.

• When operating the units, keep the temperature inside

the rack surely below 45 °C {113 °F}.

• Mount the unit into the rack with a space equivalent to

approx. 1 unit (44 mm) or more to separate from other
devices.

• To prevent the unit from overheating, do not block the

ventilation openings or slots in the cover.

• Be sure to keep the temperature inside the rack below

30 °C {86 °F} when operating the units. Installing venti-
lation fan(s) in the rack is recommended especially
when the rack is covered with front lids.

Rack mounting bracket (Small)

Rack mounting bracket (Large)

Bracket mounting 
screws

(Remove two screws at the rear side, 
and fix the brackets with bracket 
mounting screws (Flat head, M3 x 6).

Joint bracket

Flat head screws

Flat head screws

Rack mounting 
bracket (Small)

Rack mounting 
bracket (Large)

Bracket mounting 
screws

Rack mounting screws