Panasonic workio dp-c323 User Manual
62
Chapter 4 Fax/Email Settings
Example : LDAP Server
To search an Email Address or a Fax Number on LDAP Server, the following user parameter settings
are required.
are required.
Set the above items according to the descriptions below.
z
For details about LDAP search, refer to Searching for a Destination in the Operating Instructions (For
Facsimile and Internet Fax) on the provided CD-ROM.
Facsimile and Internet Fax) on the provided CD-ROM.
z
LDAP can be setup in one sequence of procedure at “04 Network Settings” of General Setting Key Operator
Mode. (see page 12)
Mode. (see page 12)
LDAP Server Name (User parameter 15)
This setting is required only when “29 DNS Server Address” in General Settings is set to “Yes”.
When the setting is “No”, set “16 LDAP Server IP” (see page 64).
When the setting is “No”, set “16 LDAP Server IP” (see page 64).
1
Press the Function key.
2
Select “Fax/Email Settings”.
3
Select “04 Key Operator Mode”.
4
Enter the password (8-digit), and then
select “OK”.
select “OK”.
5
Select “00 User Parameters”.
LDAP Server Name
User parameter 15: LDAP Server Name
LDAP Server IP
User parameter 16: LDAP Server IP
LDAP User Name
User parameter 17: LDAP User Name
LDAP Password
User parameter 18: LDAP Password
LDAP Search Base
User parameter 19: LDAP Search Base