Panasonic WV-BP140 User Manual

The following adjustment should be made by
qualified service personnel or system installers.

q Loosen the screw on the side of the camera.

w Turn the flange-back adjusting ring to the

desired position.

When the C-mount lens is mounted,

do not rotate the ring counterclockwise
by force after it stops. If the ring is rotat-
ed by force, the inner lens or CCD image
sensor may be damaged.

e Tighten the screw on the side of the camera.

Tightening the screw by force will

cause damage to the screw or deviation
of focus.

Pick-up device:

510 (H) x 582 (V) pixels, interline transfer CCD

Scanning area:

4.8 (H) x 3.6 (V) mm (equivalent to scanning area of 1/3”
pick-up tube)

Synchronization:

WV-BP140 and WV-BP144: line-locked or multiplexed vertical
Drive (VD2), selectable
WV-BP142: internal or multiplexed vertical drive (VD2), selectable

Scanning system:

2:1 interlace

Scanning:

625 lines / 50 fields / 25 frames

Horizontal:

15.625 kHz

Vertical:

50.00 Hz

Horizontal resolution:

380 lines

Video output:

1.0 V[p-p] CCIR composite 75 

Ω

/BNC connector

Signal-to-noise ratio:

46 dB (equivalent to AGC Off, weight On)

Electronic light control:

equivalent to continuous variable shutter speed between 1/50 s
and 1/120 000 s

Lens drive:

DC or video, selectable

Minimum illumination:

0.08 lx (0.008 foot-candle) at F1.4

Lens mount:

C-mount or CS-mount, selectable

Ambient operating temperature:

–10°C - +50°C (14°F - 122°F)

Ambient operating humidity:

less than 90 %

Power source and

power consumption:

WV-BP140:

220 V - 240 V AC 50 Hz, 2.6 W

WV-BP142:

12 V DC, 175 mA

WV-BP144:

24 V AC 50 Hz, 2.1 W

Dimensions (without lens):

67 mm (W) x 65 mm (H) x 123 mm (D)
2-5/8” (W) x 2-9/16” (H) x 4-13/16” (D)

Weights (without lens):

WV-BP140:

0.48 k

g (1.06 lbs)

WV-BP142:

0.32 k

g (0.70 lbs)

WV-BP144:

0.34 k

g (0.75 lbs)

Weights and dimensions indicated are approximate.
Specifications are subject to change without notice.

Body cap  ..................................................................................... 1 pc.
ALC lens connector (YFE4191J100)  ........................................... 1 pc.

Lenses:

WV-LA2R8C3B, WV-LA4R5C3B, WV-LA9C3B, WV-LA210C3, WV-LA408C3, WV-LA908C3,
WV-LZ61/10, WV-LZ61/15, WV-LZ62/2, WV-LZ62/8, WV-LF4R5C3A, WV-LF9C3A, WV-LFY3C3,
WV-LFY45C3, WV-LFY9C3

Flange-back
adjusting ring

Focus fixing screw

Focusing of
C-mount lens

Focusing of
CS-mount lens

LOCK

2001      © Matsushita Communication Industrial Co., Ltd.  All rights reserved

Web Site : http://www.panasonic.co.jp/global/