FIC mb02 Service Manual
Installation and Upgrade
FIC MB02 Service Manual
2-5
2.3.2 CPU Upgrade Procedure
The MB02 features Mobile Intel Pentium-M FCPGA Processors. It is located on the upper
right side of the system motherboard.
How to Access the CPU Socket
To install or replace the CPU, follow the steps below:
1. Turn off the system and remove both AC adapter and the battery pack from the notebook
right side of the system motherboard.
How to Access the CPU Socket
To install or replace the CPU, follow the steps below:
1. Turn off the system and remove both AC adapter and the battery pack from the notebook
unit.
2. There are four screws on the bottom case and that should be removing as the picture
indicated.
Figure 2-2
Location of screws
3. Remove keyboard cover by gently bending it and sliding it towards in front of you.
Figure 2-3
Remove keyboard Cover
4. Lift the keyboard and tilt it towards the LCD panel.
5. Release keyboard cable by sliding the ZIF connector towards up direction.
PDF created with FinePrint pdfFactory trial version