Panasonic wv-cm146 User Manual

Page of 22
-18-
The maximum DC resistance of the coaxial cable between the cameras and video
monitor is 20 
Ω
Ambient Operating Temperature :
10°C - +50°C (14°F - +122°F)
Dimension :
370 (W) x 354 (H) x 389 (D) mm [14-9/16"(W) x 13-1/2"(H) x 15-5/16"(D)]
Weight :
Approx. 12 
kg (2.4 lbs.)
Weights and dimensions shown are approximate.
Specifications are subject to change without notice.
Coaxial
Maximum
DC R/1000 ft. of
Cable Type
Cable Length
Inner Conductor
RG-59/U
200 m (660 ft.)
Less than 30 
Ω
RG-6/U
500 m (1650 ft.)
Less than 12 
Ω
SPECIFICATIONS
Power Source:
220 - 240V AC 50 Hz
Power Consumption:
Approx. 110W
CRT Size:
36.8 cm (14" diagonal)
Actual Visual Size:
33.5 cm (13" diagonal)
Camera Input:
1.0 V[p-p]/75 
Ω
, composite 
×
8 (BNC) (specified VP multiplexed camera x 4)
Video Input:
1.0 V[p-p]/75 
Ω
, composite 
×
1 (BNC)
Video Output:
1.0 V[p-p]/75 
Ω
, composite 
×
1 (BNC)
Power Supply for Camera:
Regulated current multiplex method (INPUT 1 - 4: selectable Camera Power On/Off)
Camera Switching :
Manual/Auto (sequence) with auto bypass
Sequential Switching :
Approx. 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 15, 20, 25, 30 sec. (selectable with SET UP MENU)
FRAME:  Time Lapse timing
Picture Display:
Quad/spot/Sequential Switching/VTR Playback
Skip :
Automatic
Auto Reset :
Automatic reset circuit functions 60 sec. after receiving the sensor signal.
(Auto reset on/off mode can be selected with SET UP MENU)
Resolution :
More than 330 lines at center
Sweep Linearity :
Horizontal: 5% or less
Vertical:
5% or less
Sweep Distortion :
Approx. 8%
Scanning Frequency:
Horizontal: 15.625 kHz
Vertical:
50.00 Hz
Audio Input :
8 dB/Hi-z (pin-jack)
Audio Output :
10 dB/100 
Ω
(pin-jack)
Speaker Output :
1.0 W
Intercom / Sensor Input :
1 circuit per camera
Alarm Output
Video Standby mode :
1 circuit
Standby mode :
1 circuit
Alarm time :
Approx. 1, 5, 10, 20, 30, 40, 50, 60 sec. (Selectable with SET UP MENU)
Timing :
Internal / External (electable with SET UP MENU)
Camera Extension Length :