Panasonic wv-cu360 User Manual

30

4. Press the 

button

while holding down the 

button.

The actual camera position of the preset number pro-
grammed in procedure 4 is learned as preset.

●

There are two ways of presetting camera positions.
One is to preset positions using the Camera Setup
menu of the combination camera and the other is to
preset them by operating the System Controller.
The following function is available in cases where a
selected combination camera compatible with each
function.

1. Select the desired system unit, monitor and camera.

2. Move the combination camera at preset position by

using the joystick, or zoom buttons etc.

3. Press the numeric button for the preset position to be

learned.
The preset position number is learned upon its entry.

The preset data program

• Pan/Tilt (Joystick)
• Iris (Open/Close)
• Focus (Far/Near)
• Zoom (Tele/Wide)

The preset data program differ depending on the

camera. For further information, refer to the Operating
Instructions for the camera to check the operations cov-
ered by the preset data program before operating the
camera.