Panasonic WV-LD2000 User Manual

12

■ Camera Connection

Connect the video output connector of camera to the
VIDEO IN connector with a coaxial cable. 
Note: Make sure that the cable length between the camera

and monitor is as follows.

■ Connection with Two or More

• Connect the VIDEO OUT connector of this monitor to

the video input connector of another monitor with a
coaxial cable.

• Connect the AUDIO OUT connector of this monitor to

the audio input connector of another monitor with an
audio cable.

• Up to 10 monitors can be connected to this monitor. If

11 or more monitors are connected, picture quality may
be degraded.

• Total cable length should not exceed 150 m {492 ft.}.

■ Digital Disk Recorder

● To Perform Recording 

• Connect the VIDEO OUT connector of this monitor to

the video input connector of digital disk recorder (or
other recording devices) with a coaxial cable. 

• If necessary, connect the AUDIO OUT connector of the

monitor to the audio input connector of digital disk
recorder (or other recording devices) with an audio
cable.

● To Perform Playback

Do either of the following.

• Connect the VIDEO IN connector of this monitor to the

video output connector of digital disk recorder (or other
recording devices) with a coaxial cable. 

• Connect the S-VIDEO IN connector of this monitor to

the S-video output connector of digital disk recorder (or
other recording devices) with an S-video cable.

● To Output Audio Signal

Connect the AUDIO IN connector of this monitor to the
audio output connector of digital disk recorder (or other
recording devices) with an audio cable.

■ PC Connection

Connect the PC IN connector of this monitor to the analog
RGB output connector of PC (or another device).

RG-59/U 3C-2V

RG-6/U 5C-2V

RG-11/U 7C-2V

RG-11/U 10C-2V

250 m {820 ft.}

500 m {1 640 ft.}

600 m {1 968 ft.}

800 m {2 625 ft.}