FIC a440 Service Manual
Installation and Upgrade
2-10
FIC A440 Series Service Manual
4. To remove the LAN module, press the locking tabs away from the sides of the module
until the module pops up. Then, remove the LAN module.
5. Reassemble the notebook components as follows:
− Put the internal modem / LAN door back.
− Replace the screw.
− Turn the system over.
6. Boot Windows 98 from your hard disk and insert the driver CD containing the LAN
driver for Windows 98.
7. Click
the
Start button, then click Settings, and Control Panel. Double click System and
click Device Manager tab. Under Other devices, you'll see PCI Ethernet Controller.
Select it and click Remove button.
Select it and click Remove button.
8. Click
Refresh button. The Add New Hardware Wizard will detect PCI Ethernet
Controller. Click Next to search for the driver.
9. Click
Next to continue.
10. Tick Specify a location and click Browse button. Then, navigate into the directory where
the LAN driver is and click OK.
11. Click Next to continue with the next step.
12. Click Next to accept the updated driver for Intel 82559 Fast Ethernet LAN driver.
13. Click Next to continue with LAN driver installation.
14. When Windows prompt you for Intel PRO Adapter CD-ROM, navigate into the
directory where the LAN driver is and click OK.
15. Click Finish to complete installation.
16. Restart Computer to finish setting up LAN.
If you're using Windows 98 Second Edition or Windows 2000, you don't need to
install the driver for internal LAN (Intel 82559 PCI Ethernet Adapter) since it is
already pre-installed in Windows 98SE and Windows 2000. The above LAN
driver installation is only applicable on Windows 98 RTM version.
install the driver for internal LAN (Intel 82559 PCI Ethernet Adapter) since it is
already pre-installed in Windows 98SE and Windows 2000. The above LAN
driver installation is only applicable on Windows 98 RTM version.
Installing Internal LAN for Windows NT4.0
1. After the internal LAN module is carefully inserted into the socket, boot to Windows
NT4.0 and insert the disc containing internal LAN driver for Windows NT4.0
2. Click
the
Start button, then click Settings, and Control Panel. Double click Network
and click Yes to install network.
3. With Wired to Network box ticked on, click Next.