DELL 350 User Manual
1.
Transfer components from the existing system board to the replacement system board.
2.
Remove the memory modules and install them on the replacement board.
3.
4.
Configure the settings of the replacement system board.
5.
6.
Orient the replacement board by aligning the notches on the bottom to the tabs on the computer floor.
7.
Slide the board toward the back of the computer until it clicks into place.
8.
Replace any components and cables that you removed from the system board.
CAUTION:
The microprocessor package and heat-sink assembly can get hot. To avoid burns, be sure that the package and assembly have had
sufficient time to cool before you touch them.
NOTE:
Some components and connectors on the replacement system board may be in different locations from the corresponding connectors on the
existing system board.