DELL 200 User Manual
Removing and Installing Parts
93
10 Properly dispose of the old battery. See the Product Information Guide for battery disposal
information.
Replacing the Computer Cover
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions
located in the Product Information Guide.
1 Ensure that all cables are connected, and fold cables out of the way.
Gently pull the power cables toward you so that they do not get caught underneath the drives.
2 Ensure that no tools or extra parts are left inside the computer.
3 Install the cover:
3 Install the cover:
a
Align the bottom of the cover with the tabs located along the bottom of edge of the
computer.
computer.
b
Using the tabs as leverage, rotate the cover downward.
c
Snap the cover into place by pulling back on the cover release latch, and then releasing
the latch when the cover is properly seated.
the latch when the cover is properly seated.
d
Ensure that the cover is seated correctly before moving the computer to the upright
position.
position.
NOTICE:
To connect a network cable, first plug the cable into the network device and then plug it into
the computer.
4 Connect your computer and devices to electrical outlets, and turn them on.