DELL 2450 User Manual

Page of 6
support.dell.com
Working Inside Your Computer
6-1
        
Your Dell computer system supports a variety of internal options that expand system 
capabilities. This chapter tells you how to remove the computer cover and familiarizes 
you with the internal components you may handle if you install Dell hardware options. 
For instructions on installing internal components such as expansion cards, system 
board options, and tape and CD-ROM drives, see the Installation and Troubleshooting 
Guide
.
To make working inside your computer easier, make sure that you have adequate 
lighting and a clean work space. If you disconnect cables or remove expansion cards 
temporarily, note the location and orientation of each component so that you can reas-
semble the system correctly.
You will use the information in this section every time you install a hardware option 
inside your computer. Read this section carefully, because the information is not 
repeated elsewhere in this guide.
While working inside the computer, do not attempt to service the computer except as 
explained in this guide and elsewhere in Dell documentation. Always follow the 
instructions closely.
Working inside the computer is safe—if you observe the following precautions.
WARNING FOR YOUR PERSONAL SAFETY AND PROTECTION OF THE 
EQUIPMENT
Before starting to work on the computer, perform the following steps in the 
sequence listed:
1.
Turn off the computer and all peripherals.
2.
Touch an unpainted metal surface on the computer chassis, such as the 
power supply, before touching anything inside the computer.