DELL 1100-b110 User Manual

60

Removing and Installing Parts

4 Secure the card bracket with the screw you removed in step 2. 
5 Connect any cables that should be attached to the card.

See the documentation for the card for information about the card’s cable connections.

 

NOTICE: 

Do not route card cables over or behind the cards. Cables routed over the cards can cause damage to 

the equipment.

6 If you installed a sound card:

a

Enter system setup (see page 82), select Audio Controller, and then change the setting to Off.

b

Connect external audio devices to the sound card’s connectors. Do not connect external audio 
devices to the microphone, speaker/headphone, or line-in connectors on the back panel.

7 If you installed an add-in network adapter and want to disable the integrated network adapter:

a

Enter system setup (see page 82), select Network Controller, and then change the setting to Off.

b

Connect the network cable to the add-in network adapter’s connectors. Do not connect the 
network cable to the integrated connector on the back panel.

8 Install any drivers required for the card as described in the card documentation.

Removing a PCI Card

1 Follow the procedures in "Before You Begin" on page 47.
2 If necessary, disconnect any cables connected to the card.

fully seated card

not fully seated card

bracket caught 
outside of slot

bracket 
within slot