DELL 1100-b110 User Manual

68

Removing and Installing Parts

Installing a Hard Drive

1 Unpack the replacement hard drive, and prepare it for installation.
2 Check the documentation for the drive to verify that it is configured for your computer.
3 Remove the hard drive bracket (see page 66).
4 Attach the hard drive to the hard drive bracket:

a

Place the small bracket tabs into the drive screw holes on one side of the drive.

b

Gently swing the drive toward the bracket and align the two screw holes on the other side of the 
drive with the screw holes on the bracket.

c

Insert and tighten the two screws that secures the hard drive to the hard drive bracket.

5 Install the hard drive bracket containing the hard drive:

a

Insert the two bracket tabs into the two bracket securing slots inside the computer.

b

Rotate the bracket toward the front panel and align the bracket screw hole with the screw hole in 
the chassis.

c

Replace the two screws that secure the bracket to the computer.

drive bracket

hard drive

bracket screws (2)

bracket tabs (2)