DELL 1100-b110 User Manual

Page of 116
76
Removing and Installing Parts
4 After the drive is in place, apply pressure to ensure that the drive is fully seated.
5 Use the securing screw that came with the drive to attach the drive to the computer.
 
NOTICE: 
Match the colored strip on the cable with pin 1 on the drive (pin 1 is marked as "1").
6 Connect the power cable to the system board (see page 54).
7 Locate the data cable from the CD or DVD drive in the upper drive bay and connect its middle data 
connector to the new drive. 
drive
alignment screws (2)
securing 
screw
extra alignment 
screws (2 or 4)
power cable
first CD/DVD 
connector 
(primary drive)
second CD/DVD connector 
(secondary drive)