DELL inspiron 4100 User Manual

Removing and Replacing Parts: Dell Inspiron 4100

1 antenna cable

6 antenna cable

2 in-line connector

7 right speaker holder

3 left speaker

8 mounting ring

4 mounting ring

9 right speaker

5 left speaker holder    

1.  Remove the 

2.  Remove the 

3.  Remove the 

4.  Remove the 

5.  Disconnect the speaker interface cable connectors. 

Do not pull the antenna wire when removing the 

speaker. 

Handle the speaker assemblies and speakers with care to avoid damaging the 

speaker cones. 

6.  Remove the speaker assemblies by pulling them straight up and out of the bottom case. 

The left speaker has an in-line connector, and its antenna cable is longer than the 

antenna cable of the right speaker. 

1.  Place the mounting ring over the front palm-rest screw post. 

Make sure the speaker wires are under their routing clips. Route the left speaker wire 

properly between the battery bay and hard drive area. 

2.  Slide the speaker assembly down in to the bottom case. 

Speakers face out in the bottom case 

holders. 

file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...20ok/Inspiron/4100/4100_SERVICE_MAN/remove.htm (46 of 52)6/21/2004 1:02:31 AM