DELL inspiron 4100 User Manual

Removing and Replacing Parts: Dell Inspiron 4100

8 fan guard

16 keyboard

1.  Save and close any open files, exit any open programs, and shut down the computer. 

2.  If the computer is connected (docked) to a docking device, undock it. 

3.  Keep the display open and tilt the computer back so that you can access the bottom of the 

computer. 

4.  Slide and hold the latch release on the right side, and remove any device installed in the 

module bay. 

5.  Slide and hold the latch release on the left side, and remove any battery installed in the battery 

bay. 

6.  Locate the orange palm-rest removal buttons. Firmly press the buttons with the eraser end of a 

pencil (or a dull utensil smaller than your finger) to release the palm rests. 

 

7.  Remove the palm rests. 

8.  To replace the palm rests, insert the tabs on the inside edge of the palm rest into the slots on 

the computer. Then press along the outside edges of the palm rest until it snaps into place. 

Repeat the process on each side.

file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...20ok/Inspiron/4100/4100_SERVICE_MAN/remove.htm (8 of 52)6/21/2004 1:02:31 AM