DELL FE100 User Manual
support.dell.com
Getting Started
1-11
PowerEdge Cluster FE100/FL100
Datacenter Server Minimum System
Requirements
Dell PowerEdge Cluster FE100/FL100 Datacenter Server configurations require the
following hardware and software components:
following hardware and software components:
•
Cluster nodes
•
Cluster storage
•
Cluster interconnects
•
Operating system and system management software
Cluster Nodes
Cluster nodes require the following hardware resources:
•
Two to four supported Dell PowerEdge systems, each with at least two
microprocessors.
microprocessors.
•
For each server, a minimum of 2 GB random access memory (RAM) and two
HBAs.
HBAs.
•
For each server, at least one network interface controller (NIC) is required for
client local area network (LAN) connections (public network).
client local area network (LAN) connections (public network).
•
One NIC required for the cluster interconnect (private network).
Cluster Storage
Cluster storage requires the following:
•
For each cluster, at least one supported PowerVault 65xF/630F Fibre Channel
storage system with dual standby power supplies (SPSs).
storage system with dual standby power supplies (SPSs).
•
For each PowerVault 65xF disk processor enclosure (DPE), at least ten hard-disk
drives are required;
drives are required;
•
Each PowerVault 630F disk array enclosure (DAE) attached to the cluster can con-
tain five or ten hard-disk drives in each DAE.
tain five or ten hard-disk drives in each DAE.
Cluster Interconnect Connections
(Private Network)
The cluster connections for the cluster interconnect (private network that connects
the cluster nodes together) requires the following hardware components:
the cluster nodes together) requires the following hardware components:
•
For each server, either a Broadcom NetExtreme Gigabit Ethernet NIC or
Giganet cLAN 1000 adapter.
Giganet cLAN 1000 adapter.
•
For each server, one Category 5 (CAT 5) Ethernet cable or Giganet cLAN cable to
connect the nodes.
connect the nodes.