DELL powervault e03j001 User Manual
Installing Enclosure Components
47
Installing the Backplane
1 Align the holes on the backplane with the holes on the enclosure.
2 Tighten the captive screw to secure the backplane to the chassis.
2 Tighten the captive screw to secure the backplane to the chassis.
See Figure 3-14 for PowerVault MD1200 or Figure 3-15 for
PowerVault MD1220.
PowerVault MD1220.
3 Replace the screws that secure the backplane to the chassis.
See Figure 3-14 for PowerVault MD1200 or Figure 3-15 for
PowerVault MD1220.
PowerVault MD1220.
4 Align the slots on the EMM/power supply cage with the tabs on the
5 Push the EMM/power supply cage toward the front of the enclosure.
6 Replace the screws that secure the EMM/power supply cage to the chassis.
7 Replace the control panel. See "Installing the Control Panel" on page 44.
8 Replace the power supply/cooling fan modules. See "Installing a Power
6 Replace the screws that secure the EMM/power supply cage to the chassis.
7 Replace the control panel. See "Installing the Control Panel" on page 44.
8 Replace the power supply/cooling fan modules. See "Installing a Power
9 Replace the hard drives. See "Installing a Hard Drive" on page 32.
10 Connect all the cables to the enclosure.
11 Turn on the enclosure and the host server.
11 Turn on the enclosure and the host server.
book.book Page 47 Monday, December 7, 2009 4:51 PM