DELL PowerEdge R210 User Manual

About Your System

33

Warning: Control 

Panel is not 

installed.

The control panel is not 
installed or has a faulty cable 
connection.

Install the control panel, or 
check the cable connections 
between the display module, 
the control panel board, and 
the system board. See 
"Control Panel Assembly" on 
page 101.

Warning! No 

micro code 

update loaded 

for processor n.

Micro code update failed.

Update the BIOS firmware. 
See "Getting Help" on 
page 133.

Warning! 

Performance 

degraded. CPU 

and memory set to 

minimum 

frequencies to 

meet PSU 

wattage. System 

will reboot.

The system configuration of 
processor, memory modules, 
and expansion card may not 
be supported by the power 
supplies.

If any system components 
were just upgraded, return 
the system to the previous 
configuration. If the system 
boots without this warning, 
then the replaced 
component(s) are not 
supported with this power 
supply. See "Power Supply" 
on page 97.

Warning! 

Unsupported 

memory 

configuration 

detected. The 

memory 

configuration is 

not optimal. The 

recommended 

memory 

configuration 

is: <message>

Invalid memory 
configuration. The system 
will run but with reduced 
functionality.

Ensure that the memory 
modules are installed in a 
valid configuration. See 
"General Memory Module 
Installation Guidelines" on 
page 79. If the problem 
persists, see 
"Troubleshooting System 
Memory" on page 116.

Message

Causes

Corrective Actions

book.book  Page 33  Wednesday, August 12, 2009  4:51 PM