Gateway 7001 Series User Manual
31
www.gateway.com
Reviewing and describing the access
point
point
Field
Action
IP Address
This box is not editable because the IP address is
already assigned (either through DHCP, or statically
through the Ethernet (Wired) settings as described in
already assigned (either through DHCP, or statically
through the Ethernet (Wired) settings as described in
).
MAC Address
A MAC address is a permanent, unique hardware
address for any device that represents an interface to the
network. The MAC address is assigned by the
manufacturer.
address for any device that represents an interface to the
network. The MAC address is assigned by the
manufacturer.
You cannot change the MAC address. It is provided here
for informational purposes as a unique identifier for an
interface.
for informational purposes as a unique identifier for an
interface.
The address shown here is the MAC address for the
bridge (br0). This is the address by which the AP is
known externally to other networks.
bridge (br0). This is the address by which the AP is
known externally to other networks.
To see MAC addresses for guest and internal interfaces
on the AP, see the Status > Interfaces tab.
on the AP, see the Status > Interfaces tab.
Firmware
Version
Version
Version information about the firmware currently installed
on the access point.
on the access point.
As new versions of the Gateway 7001 Series
self-managed AP firmware become available, you can
upgrade the firmware on your access points to take
advantages of new features and enhancements.
self-managed AP firmware become available, you can
upgrade the firmware on your access points to take
advantages of new features and enhancements.
For instructions on how to upgrade the firmware, see
.
Location
Specify a location description for this access point.