Gateway 7450R User Manual

System Features          

System fault LED glows amber when a hardware or system failure occurs. 
Pressing the fault LED reset button turns this LED off, but does not correct 
the fault.

Power LED glows green when the server has power and flashes green when 
the server is in power saving mode. This LED glows amber when AC power 
to the server is on, but the internal (DC) power is off which means there is 
power to the server but the server is powered down.

Fault LED reset button resets any of the fault LEDs to its original state. This 
button does not correct or clear the fault. If the fault condition persists, the 
appropriate LED will turn on again until the fault is corrected.

Power button turns the server on and off.

LAN1 LED blinks green when there is traffic on the LAN1 connector. Glows 
amber when the LAN1 connector experiences an interruption in connectivity.

LAN2 LED blinks green when there is traffic on the LAN2 connector. Glows 
amber when the LAN2 connector experiences an interruption in connectivity.

Blower fault LED glows amber when one of the blowers has failed or entered 
an out-of-tolerance state.

Fan fault LED glows amber when one of the fans has failed or entered an 
out-of-tolerance state.

USB port provides front panel access for USB peripherals.

Power LED

Power button

Front panel connector

System fault LED

Fault LED reset button

LAN1 LED

LAN2 LED
Blower fault LED
Fan fault LED
USB port

USB connector

8507328.book  Page 9  Thursday, February 15, 2001  11:28 AM