Gateway 7450R User Manual

          Gateway 7450R Server System Manual

The mouse is not plugged in 
or connected properly

Make sure that the cable is plugged in correctly.

The mouse driver did not load 
when the system started

Load the appropriate mouse driver manually or contact 
technical support.

The mouse is defective

Try a mouse that you know is working.

The monitor is not turned on

Make sure that the monitor is plugged in and turned on. 
If the monitor is turned on, the green power LED should 
illuminate.

The monitor data cable is 
not connected

Make sure that the monitor data cable is connected to the 
video controller on the back of the system. 

The connector or cable is 
damaged

Check the connector and cable for bent or damaged pins. 

The monitor brightness and 
contrast controls are turned 
down

Adjust the brightness and contrast knobs to the center 
position.

The monitor is defective

Connect a working monitor to the server.

The video card is not seated 
correctly

Open the system and reseat the video card. The server 
board may have a built-in video adapter, so there may not 
be a video adapter to remove and replace.

The video card is not 
compatible with the system

Check the documentation or technical support to make 
sure that the video card is compatible with the system. If 
not, obtain a compatible video card. The server board 
may have a built-in video adapter, so there may not be 
a video adapter to remove and replace.

The second processor is not 
seated properly

Open the system and reseat the the second processor.

8507328.book  Page 86  Thursday, February 15, 2001  11:28 AM