Gateway 6000 6100 6500 6600 m360 mx6000 mx6100 mx6200 mx6400 mx6500 mx6600 mx6900 nx500 Service Manual

www.gateway.com

25

6

Pull the old card out of the slot.

7

Hold the new card at a 30-degree angle and slide it into the empty slot. This card is keyed 
so it can only be inserted in one direction. If the card does not fit, make sure that the notch 
in the card lines up with the tab in the card slot.

8

Move the antenna cables out of the way.

9

If the wireless card is held by clips, press the card down until it clicks into place.

-OR-

If the wireless card is held by a screw, replace the screw.

10

Reattach the light gray antenna cable to the connector labelled MAIN or M, then reattach 
the black antenna cable to the connector labelled AUX or A.

11

Replace the wireless bay cover, then tighten the screw.