Gateway 6000 6100 6500 6600 m360 mx6000 mx6100 mx6200 mx6400 mx6500 mx6600 mx6900 nx500 Service Manual
Replacing Notebook Components
36
Replacing the CMOS battery
Tools you need to complete this task:
Screws removed during this task:
To replace the CMOS battery:
1
Complete the steps in
2
Remove the keyboard cover by following the instructions in
3
Open the keyboard compartment by following the instructions in
4
Locate the old battery on the system board. If you have access to the battery connector
on the system board, go to
on the system board, go to
.
-OR-
If you do not have access to the battery connector on the system board, complete the
following:
following:
a
Remove the LCD panel by following the instructions in
b
Remove the palm rest by following the instructions in
, then go to
Tip
You do not need to unplug the keyboard from the notebook.
Flat-blade driver
Scribe or non-marring tool
- OR -
Phillips #0 screwdriver
1-3 black (keyboard)
2 black (keyboard cover)