Gateway 6000 6100 6500 6600 m360 mx6000 mx6100 mx6200 mx6400 mx6500 mx6600 mx6900 nx500 Service Manual
www.gateway.com
51
Replacing the LCD panel assembly lid
Tools you need to complete this task:
Screws removed during this task:
To replace the LCD panel assembly lid:
1
Complete the steps in
2
If the notebook has IEEE 802.11 wireless networking built in, unplug the antenna cables
from the IEEE 802.11 wireless card by following the instructions in
from the IEEE 802.11 wireless card by following the instructions in
3
Remove the keyboard cover by following the instructions in
4
Open the keyboard compartment by following the instructions in
5
Remove the LCD panel by following the instructions in
Caution
LCD panel assembly lids vary by model. Do not force a new lid to connect to an
existing LCD front if the new lid does not match. You may need to order a different lid.
Tip
You do not need to unplug the keyboard from the notebook.
Flat-blade driver
Scribe or non-marring tool
- OR -
Phillips #0 screwdriver
1-3 black (keyboard)
2 black (keyboard cover)
6 chrome (LCD panel)
4 or 6 chrome (LCD panel assembly)
4 black (LCD panel hinges)