JVC 0405tkh-cr-mu User Manual

Setting up your TV

AV-32/28EX5BK / LCT1821-001A-U / ENGLISH

To view the pay-per-view of the

Digital Terrestrial broadcasting

It is required to subscribe to a pay-per-view

company to view the pay-per-views of the
Digital Terrestrial broadcasting.
Obtain the Conditional Access Module

(CAM) and the Viewing card by subscribing
to a pay-per-view company, then insert those
to the Television using the following

procedure.

1 Switch off the TV and unplug from

the mains.

2 Insert the Viewing Card to the CAM.

• The Viewing Card should be inserted

straight into the slot.

3 Insert the CAM to the slot of the TV.

• The CAM should be correctly inserted,

it is impossible to insert fully if
reversed. The CAM or the TV terminal

may be damaged if the CAM is
forcefully inserted.

4 Connect the TV to the mains

supply, switch on, and then wait for

few moments until the card is

activated.

• Some CAMs may require the following

set up.

Please set the CAM by entering the
DTV menu, Common Interface then
pressing a button. (CAM set up

menu is not displayed when it is not
required.)

• To see the viewing contract

information, press H, Select
DTV and Press a, then Select

Common Interface and press a.

Connecting the power cord to

the AC outlet

Insert the AC plug on the power cord from

the TV into an AC outlet.

Caution

• Operate only from the power source specified

(AC 220 – 240 V, 50 Hz) on the unit.

Putting the batteries into the

remote control

Use two AA/R6 dry cell batteries.
Insert the batteries from the - end, making
sure the + and - polarities are correct.

• Follow the warnings printed on the

batteries.

• Battery life is about six months to one

year, depending on how much you use the
remote control.

• The batteries we supply are only for

setting up and testing your TV, please

replace them as soon as you need to.

• If the remote control does not work

properly, replace the batteries.

AV-32&28EX5BK_Eng.book Page 7 Wednesday, April 13, 2005 5:51 PM