JVC bd-x200u User Manual
85
NETWORK MENU Screen
The following table identifies and describes the parameters that may be set using the NETWORK MENU screen.
Top half
Top half
: Appearance on monitor screen
Bottom half : Appearance on LCD display
[ ]
[ ]
: Default setting
Parameter
Possible settings
Description
HOST NAME
bdx200
HOST
IP ADDRESS
[192.168.0.2]
IP ADD
SUBNET MASK
[255.255.255.0]
SUBNET
DEFAULT
[192.168.0.254]
GATEWAY
GATE
MENU
This parameter is used to enter the BD-X200’s network name using a keyboard.
(Names may be up to 20 characters in length. Alphanumerical characters and hyphen
(-))
(Names may be up to 20 characters in length. Alphanumerical characters and hyphen
(-))
This parameter is used to set the IP address. It is important to ensure that no two
devices on a single network share the same IP address.
devices on a single network share the same IP address.
This parameter is used to set the subnet mask. Connected BD-X200s should have
the same network setting.
the same network setting.
This parameter is used to set the gateway address. Connected BD-X200s should
have the same address.
have the same address.
This button is used to return to the Setup Menu screen.
Others
Troubleshooting
Before requesting for repair, please check the following URL:
http://www.jvc-victor.co.jp/english/pro/prodv/
If problem persists, contact either the store where the BD-X200 was purchased or your nearest JVC authorized dealer.
http://www.jvc-victor.co.jp/english/pro/prodv/
If problem persists, contact either the store where the BD-X200 was purchased or your nearest JVC authorized dealer.