JVC 0210TTH-SW-VP User Manual
26
Set the IP address for this projector. There are 2 methods to set the IP address.
Assigning a static IP address
Assigning an IP address from the DHCP Server
Assigning an IP address from the DHCP Server
Assigning a static IP address
The
AIP Address SettingB of this projector is set to ASTATIC IPB (the DHCP client function is OFF) by default.
Upon turning on the power, this projector starts running with the following IP address.
IP Address
: 192.168.0.2
Subnet Mask
: 255.255.255.0
Default Gateway
: 192.168.0.254
IP address setting at the computer
Set the computer to an IP address that enables communication with this projector.
1
Click
AStartB and select AControl PanelB
2
Double click
ANetwork ConnectionsB
3
Right-click on
ALocal AreaB and select APropertiesB
● Check to ensure that the AClient for Microsoft NetworksB and AInternet Protocol(TCP/IP)B check boxes are selected.
4
Select
AInternet Protocol(TCP/IP)B and click APropertiesB
5
Set the IP address
6
Click
AOKB on the ALocal Area Connection PropertiesB screen
IP Address Settings
A
B
C
E
D
Click
AOKB
Set
AIP addressB
(For example, use 192.168.0.100 when DLA-SH7NL is in its
default settings)
default settings)
NOTE:
● Make sure that you take note of the original IP address
before altering.
● When setting, ensure that a duplicate IP address is not
used within the same network environment.
Set
ASubnet maskB
Set to a value that is appropriate for the setting operation.
Clarify with the network administrator if you have any queries.
(Use 255.255.255.0 when the camera is in its default settings)
Clarify with the network administrator if you have any queries.
(Use 255.255.255.0 when the camera is in its default settings)
Select
AUse the following IP addressB
When a
ADefault gatewayB is present, make use of the IP
address (e.g., 192.168.0.254)