JVC dr-m10s User Manual
Filename [DR-M10SE_08Recording.fm]
Masterpage:Left+
52
EN
Page 52
February 12, 2004 5:15 pm
RECORDING (cont.)
Recording Features
Recording Speed
MPEG2 format is used as recording format. As a guide for picture
quality, the “bps” unit is used to represent how much data can
be recorded per second. The larger this value is, the better the
picture quality becomes but more capacity is required for the
recording. Select XP or SP for programmes where quick
movement occurs, such as sports programmes, and LP or EP for
talk shows, etc. with relatively less movement.
The recording speeds for a 4.7 GB disc are set as follows:
quality, the “bps” unit is used to represent how much data can
be recorded per second. The larger this value is, the better the
picture quality becomes but more capacity is required for the
recording. Select XP or SP for programmes where quick
movement occurs, such as sports programmes, and LP or EP for
talk shows, etc. with relatively less movement.
The recording speeds for a 4.7 GB disc are set as follows:
Instant Timer Recording (ITR)
This easy method lets you record for from 30 minutes to 6 hours
(selectable in 30-min. increments), and shuts the unit off after
recording is finished.
(selectable in 30-min. increments), and shuts the unit off after
recording is finished.
1
Start recording.
Press 7 on the unit.
2
Engage the ITR mode.
Press 7 again. On the front display panel, “0:30”
appears.
appears.
3
Set the recording duration.
If you want to record for more than 30 minutes, press 7
to extend the time. Each press extends recording time by
30 minutes.
to extend the time. Each press extends recording time by
30 minutes.
NOTES:
● You can only perform ITR using the 7 button on the unit’s
front panel.
● If “DIRECT REC” is set to “ON” in the menu, Instant Timer
Recording (ITR) function does not work. (
Watch Another Programme While
Recording on the Unit
Recording on the Unit
While recording is going on, you can watch another programme
on the TV by using the TV’s tuner. It is required that the remote
control is set to be able to operate the TV in advance.
(
on the TV by using the TV’s tuner. It is required that the remote
control is set to be able to operate the TV in advance.
(
1
Switch the TV to TV mode.
During recording, press TV AV/VIDEO to select TV
mode.
mode.
● Video mode is disengaged and the video indicator on the unit
is turned off.
● The programme received on the TV’s tuner is displayed on the
TV screen.
2
Switch the remote control to TV control mode.
Slide the TV/CABLE/SAT/DVD switch to TV.
3
Select the desired channel.
Press PR +/– repeatedly.
NOTE:
If a decoder is connected to the unit (
pg. 90), you can select
a scrambled channel as well as other normal channels.
Elapsed Recording Time and Disc
Remaining Time Indication
Remaining Time Indication
During recording, press DISPLAY repeatedly until the
desired indication appears on the front display panel.
desired indication appears on the front display panel.
● Each time you press DISPLAY, the time indication changes as
follows:
Elapsed recording time ] Disc remaining time ] Clock ]
(Back to the beginning)
(Back to the beginning)
Recording
speed
Recording amount
(approx.)
Maximum recording
time (approx.)
XP
10 Mbps
1 hour
SP
5 Mbps
2 hours
LP
2 Mbps
4 hours
EP
1.6 Mbps
6 hours
FR60–FR360
The amount varies
depending on the
selected time.
depending on the
selected time.
1 – 6 hours
FR420
7 hours
FR480
8 hours
1 STANDBY/ON
S-VIDEO
VIDEO
L(MONO)-AUDIO-R
DV
DV IN
F1
REC MODE
SAT#
VIDEO
PULL - OPEN
7
VIDEO
DVD
TV
DVD
TIMER
PROG/CHECK
NEXT
PREVIOUS
PAUSE
REC
REC MODE LIVE CHECK
SET UP DISPLAY ON SCREEN
OPEN/
CLOSE
PROGRESSIVE
SLOW
SLOW
PLAY/SELECT
STOP/
CLEAR
NAVIGATION
TOP MENU
RETURN
ENTER
MENU
STANDBY/ON
ABC
JKL
GHI
MNO
TUV
PQRS
WXYZ
AUX
CANCEL
MEMO/MARK
DEF
CABLE/SAT
PR
SAT#
SHOW VIEW/
VIDEO Plus+
TV/CBL/SAT
TV
TV AV
VIDEO
TV%
PR +/–
DISPLAY
TV AV/
VIDEO
DR-M10SE_01.book Page 52 Thursday, February 12, 2004 9:08 PM