JVC DT-F9L5 User Manual

41

41

●

1 

Change the input to one that you want to assign a video source name for.

2 

Select “Character Setting”.

3 Press    buttons to select the first character.

●

 Each time you press   button, the character changes as follows. 

  Press   button to reverse the order.

Space

Character Setting

4 Press  button to move the arrow to the next space.

●

 The characters entered before moving the arrow are memorized.

5 Repeat 

steps 

3 and 4 (10 characters at maximum).

6 

Press MENU button to store the name.

Character Setting

●

 

1.  Set reduced function to perform.

 

2.  Set both time for starting the function and time for letting it work.

 

3.  Activate the STANDBY MODE by Execute.

 

■ Aborting the ongoing LCD Saver

 

  Operating this apparatus may lead to aborting the OPERATION MODE.

 

■ Stopping the operation 

 

  Executing “Cancel”.  Turn off the power.

 

●  Once operating the function, unless turned off the power or executed “Cancel”, reduced function is automatically performed every 24 hours.

 

■ Example of setting up “1st Start” and “Work Time”

●

 

This unit supports “TSL UMD Protocol – V4.0” from Television Systems Ltd.

 

16 character text display and one tally on each side can be controlled.

 

The color of both the text and the tally can be set.

 

Using the address setting, up to 127 units can be controlled individually.

 

To use, set the external control terminals of this unit to serial format.

 

For details of control commands, refer to the homepage of Television Systems Ltd.

●

 

Puts the unit into Low Power Mode 30 seconds after the monitor is switched off (standby) to further reduce power consumption.

•  Low Power Mode will not activate when “Remote Active On Standby” on the Set-up Menu is set to “On”.
•  The power lamp will be turned off during Low Power Mode.

Time to set in 

the 1st Start

0h

2h

4h

6h

8h

10h

12h

14h

16h

18h

20h

22h

24h

Timing to run "Execute"

LCD Saver  in 
standby

LCD Saver in 
operation

Time to set in 

Work Time

Text display area

Tally 2

Tally 1

LCD Saver  in 
standby

DT-F9L5_EU.indb   41

DT-F9L5_EU.indb   41

2012/12/18   14:13:08

2012/12/18   14:13:08