JVC GR-DF570 User Manual

Page of 68
GETTING STARTED
18 
EN
MasterPage: Left
NOTES:
● If you wait a few seconds and the cassette holder 
does not open, close the cassette holder cover 
and try again. If the cassette holder still does not 
open, turn the camcorder off then on again.
● If the tape does not load properly, open the 
cassette holder cover fully and remove the 
cassette. A few minutes later, insert it again.
● When the camcorder is suddenly moved from a 
cold place to a warm environment, wait a short 
time before opening the cassette holder cover. 
The provided memory card is already inserted in 
the camcorder at the time of purchase. 
1
Make sure the camcorder’s power is off.
2
Open the card cover (MEMORY CARD).
3
To load a memory card, firmly insert it with 
its clipped edge first.
To unload a memory card, push it once. After 
the memory card comes out of the camcorder, 
pull it out.
● Do not touch the terminal on the reverse side of 
the label.
4
Close the card cover.
To protect valuable files (available only for 
SD Memory Card)
Slide the write/erase protection tab on the side 
of the memory card in the direction of “LOCK”. 
This prevents the memory card from being 
recorded over. To record on this memory card, 
slide the tab back to the position opposite to 
“LOCK” before loading it.
NOTES:
● Some brands of memory cards are not compatible 
with this camcorder. Before purchasing a memory 
card, consult its manufacturer or dealer.
● Before using a new memory card, it is necessary 
to format the card. (
ATTENTION:
Do not insert or remove the memory card while the 
camcorder is turned on, as this may cause the 
memory card to be corrupted or cause the 
camcorder to become unable to recognise whether 
or not the card is installed.
Loading/Unloading A Memory 
Card (GR-DF570/470 only)
Memory card
Card Cover 
(MEMORY CARD)
Label
Write/erase protection tab
Clipped edge
GR-DF570_470ASIA.book  Page 18  Wednesday, January 19, 2005  9:55 AM