JVC HR-S7965EK User Manual
advanced features
66
Clock Set
You should only need to perform this function if:
• Auto Clock Set was not performed correctly by Auto Setup or Preset Download
• The VCR’s memory backup has expired
• You want to change the Just Clock setting
• The VCR’s memory backup has expired
• You want to change the Just Clock setting
Setting the Clock
get to the initial set screen
Press m. Move the highlight bar to
INITIAL SET
using the
A
and B buttons and press
OK
3
/
(or E).
get to the clock set screen
Move the highlight bar to
CLOCK SET
using the A and
B
buttons and press
OK
3
/
(or E).
set time and date
When the
CLOCK SET
screen appears, the
time will be blinking. Use the A and B buttons to set the
correct time (pressing and holding will advance the time in
30 minute increments) and then press
correct time (pressing and holding will advance the time in
30 minute increments) and then press
OK
3
/
(or E). The date
will blink. Use the A and B buttons to set the correct
date (pressing and holding will advance the date in 15 day incre-
ments) and then press
date (pressing and holding will advance the date in 15 day incre-
ments) and then press
OK
3
/
(or E). Set the correct year in the
same way and press
OK
3
/
.
set just clock
Set as desired using the A and B
buttons then press
OK
3
/
(or E).
set preset for clock data source
If you have set
JUST CLOCK
to
ON
, you will need to
specify a preset (station) for
JUST CLOCK
to take its source data from. Use the A and B
buttons to select the preset and press
OK
3
/
(or E).
start clock oper ation
Press m.
Notes on Just Clock
Some TV stations transmit a time signal with their broadcasts. This VCR has the ability to use
this signal to update its internal clock (including the adjustment for British Summer Time). It will
do this every hour except for 23:00, 00:00, 01:00 and 02:00. By setting Just Clock to
this signal to update its internal clock (including the adjustment for British Summer Time). It will
do this every hour except for 23:00, 00:00, 01:00 and 02:00. By setting Just Clock to
ON
, you are
enabling the VCR to do this.
Just Clock is not effective in the following circumstances:
Just Clock is not effective in the following circumstances:
• when the VCR is powered on
• when the VCR is in Timer or Auto Satellite Programme Recording modes
• when a difference of more than 3 minutes between the internal clock and the time signal exists.
• when reception conditions are poor.
• when the VCR is in Timer or Auto Satellite Programme Recording modes
• when a difference of more than 3 minutes between the internal clock and the time signal exists.
• when reception conditions are poor.
[1] a k
[MENU]: EXIT
[MENU]: EXIT
CLOCK SET
TIME
DATE
YEAR
0: 00
01 . 01
03
JUST CLOCK : ON
TV PR.
TV PR.
:
1
HR-S7965EK-EN/p66-71
4/19/03, 01:32 PM
66