JVC LYT1439-001B User Manual

Page of 68
EN
 53
EDITING
MasterPage: Start_Right
NOTES:
● If no image is displayed on the LCD monitor, set 
“S/AV INPUT” to “OFF”. (
● Digital Dubbing is performed in the sound mode 
recorded on the original tape, regardless of the 
current “SOUND MODE” setting. (
[A] Using USB cable
It is possible to do the following thing:
● Transfer still images stored on a memory card 
to a PC.
[B] Using DV cable
It is also possible to transfer still/moving images 
on a tape to a PC with a DV connector by using 
the software equipped with the PC or 
commercially available software.
If you are using a Windows
® 
XP, you can use 
Windows
® 
Messenger to conduct video 
conferences over the Internet, using a 
camcorder. For details, refer to the help for the 
Windows
® 
Messenger.
NOTES:
● Refer to “SOFTWARE INSTALLATION AND PC 
CONNECTION GUIDE” for the bundled software 
and drivers.
● It is recommended to use the AC Adapter as 
the power supply instead of the battery pack. 
(
● Never connect the USB cable and the DV 
cable simultaneously to the camcorder. 
Connect only the cable you wish to use to the 
camcorder.
● When using a DV cable, be sure to use the 
optional JVC VC-VDV206U or VC-VDV204U DV 
cable depending on the type of DV connector 
(4 or 6 pins) on the PC.
● If the PC connected to the camcorder via the USB 
cable is not powered, the camcorder does not 
enter the USB mode.
● The date/time information cannot be captured into 
the PC.
● Refer to the instruction manuals of the PC and 
Software.
● The still images can also be transferred to a PC 
with a DV connector-equipped capture board.
Connection To A Personal Computer
[A] Using USB cable
To USB
PC
PC with DV connector
USB cable 
(provided)
To DV IN/OUT
[B] Using DV cable
To USB 
connector
To DV connector
Core filter
Core filter
DV cable 
(optional)
OR
When connecting the camcorder to a PC 
using a DV cable, make sure to follow the 
procedure below. Connecting the cable 
incorrectly may cause malfunctions to the 
camcorder and/or the PC.
● Connect the DV cable first to the PC, and then 
to the camcorder.
● Connect the DV cable (plugs) correctly 
according to the shape of the DV connector.
CONTINUED ON NEXT PAGE
GR-DF550US.book  Page 53  Thursday, February 24, 2005  11:17 AM