JVC VN-V26U User Manual

14

Sending audio to the network (VN-V26U only)

Sends out audio picked up using the built-in 
microphone of VN-V26U to computers.

Receiving and outputting audio from 
the computer via the network (VN-V26U only)

Receives audio that is input to a computer, and 
outputs the audio to a speaker that is connected 
to [AUDIO OUT] terminal of VN-V26U.

● Use of a headset for audio input/output of the 

computer is recommended to prevent 
howling.

VN-V25U/26U comes with a motion detection 
feature and dual alarm input.
By motion detection or alarm input, actions such 
as mail delivery, message transmission via TCP/
UDP, alarm output can be triggered. These 
actions can also be triggered by combination of 
two alarm inputs.
Installing an FTP server enables uploading of 
JPEG images before and after the alarm input 
time (pre-/post-recording) to the server.

VN-V25U/26U enables users to authorize or 
reject the acquisition of images by specific IP 
address.

The following uses are also possible by 
developing a customized application software 
that supports the API of VN-V25U/26U.For details, please refer to 

supplied CD-ROM.

● Monitors via the computer while at the same 

time records images to the HDD of the 
computer.

● Performs recording by changing the frame 

size/frame rate during alarm occurrence.

● Records the type and time of alarm 

occurrence on the computer.

MAC  address

Computer

Headset

Built-in 
mike

MAC  address

Speaker with
amplifier

Headset

Computer

For detailed usage of VN-V25U/26U, please refer to “Instructions” (pdf) in the supplied   
CD-ROM.

MAC  address

Computer

Sending JPEG images 
before and after alarm 
input to FTP

Alarm Device

VN-V25U_26U_EN.book  Page 14  Monday, January 21, 2008  10:13 AM