Toshiba cd-rw-dvd-rom combo drive sd-r1612 User Manual
13
DRIVE CONNECTORS –SD-R1612
Figure 1.SD-R1612 Combo Drive Rear Panel - Connectors
Power
Connector
Connector
Power is supplied to your Combo drive by the connection with your computer's +5V/+12V
power cable to the power socket at the back of drive. One side of the plug has chamfered
edges, so the power connector fits only one way.
power cable to the power socket at the back of drive. One side of the plug has chamfered
edges, so the power connector fits only one way.
CAUTION: Severe damage to the Drive circuits may occur if power cable is plugged in
upside-down with power ON.
upside-down with power ON.
Audio
Connectors
Connectors
Supplies Analog and Digital sound to your system.
ATAPI
Connector
Connector
The SD-R1612 DVD drive is connected to your computer system through the ATAPI
connector.
connector.
Mode Select
Jumper
Jumper
The mode select jumpers are 6 straight angle pins located on the rear of the DVD drive.
By placing a jumper on the pins, you can select the following functions: CL (CSEL), SL
(Slave) or MA (Master). (see Setup for additional information).
By placing a jumper on the pins, you can select the following functions: CL (CSEL), SL
(Slave) or MA (Master). (see Setup for additional information).