Toshiba e-studio 165 User Manual
3 CONNECTING TO A COMPUTER
24 Connecting to the USB Port
Connecting to the USB Port
This section describes how to connect this equipment to a computer using a USB 2.0 compatible
cable.
cable.
This USB cable is not included in the accessories. Obtain one compatible with your com-
puter.
When the Network Printer Kit is installed, the USB terminal originally installed on this equip-
ment will be disabled. The USB connector described in this step is the connector of the Net-
work Printer Kit.
puter.
When the Network Printer Kit is installed, the USB terminal originally installed on this equip-
ment will be disabled. The USB connector described in this step is the connector of the Net-
work Printer Kit.
1
After the Network Printer Kit has been installed, insert the USB
cable into the deep end of the USB interface connector on the rear
side of this equipment.
cable into the deep end of the USB interface connector on the rear
side of this equipment.
2
Connect the other end of the USB cable to the USB port of your
computer.
computer.
3
Turn ON the power of this equipment and the power of the com-
puter.
puter.