Toshiba NB505 User Manual

Page of 137
User’s Manual
6-9
NB500/NB505/NB520/NB525/NB550D/NB555D Series
Memory Media Card
For further information, please refer to Chapter 3, Operating Basics.
Pointing device
If you are using a USB mouse, you should also refer to both the 
 section in this chapter, and the documentation supplied with your 
mouse.
Touch Pad
Problem
Procedure
Memory media card 
error occurs
Remove the memory media card from the computer 
and then reinsert it in order to ensure it is firmly 
connected.
If the problem persists, then you should refer to the 
documentation supplied with your memory media 
card for further information.
You cannot write to a 
memory media card
Remove the memory media card from the computer 
and check to ensure that it is not write protected.
You cannot read a file Check to ensure the required file is actually on the 
memory media card that is inserted into the 
computer.
If you are still unable to resolve the problem, 
contact your reseller, dealer or service provider.
Problem
Procedure
The Touch Pad does 
not work.
Check the Device Select settings.
Click Start -> Control Panel -> Hardware and 
Sound -> Mouse.
Pressing FN + F9 to enables.
On-screen pointer 
does not respond to 
pointing device 
operation
In this instance the system might be busy - Try 
moving the mouse again after waiting a short while.
Double-tapping 
(Touch Pad) does not 
work
In this instance, you should initially try changing the 
double-click speed setting within the Mouse Control 
utility.
1. To access this utility, click Start -> Control 
Panel -> Hardware and Sound -> Mouse.
2. Within the Mouse Properties window, click the 
Buttons tab.
3. Set the double-click speed as required and click 
OK.